How to Create Your Own Dog Mask – The Basics

In this article we’re going to examine how to make your own dog mask. We’ll cover the basics and then go on to take a look at a number of the more advanced tips and techniques that you can use.

For those who have a dog that likes to bark, and especially if your dog loves to play in the backyard and other regions of the house, you need to get them some special dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the set-up that will look a little scary at first, but it’s actually quite simple. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape out of the cardboard, so you will need to cut around the edge of the mask so that you get something which resembles a cone. The main thing here is to be realistic with what kind of paper plate which you’re using.

Then you will need to wrap the cardboard around the edges of the paper plate, making sure there is a good seal between the two pieces so that you can ensure that nothing will leak once you place the mask on. Make sure the edges are cut so that the edges are not sharp, as this may damage the edges of the mask.

Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making sure that it runs smoothly and evenly across the entire mask. You will want to start with one side of the mask first, so that you can work your way round it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it’s best that you leave about one-fifth of an inch of paint on the edges so that it runs across the cardboard.

Don’t worry too much about the paint getting stuck to your mask. It’s easy to eliminate it later, and it’ll leave you with a nice finished mask to show off to everybody! It’s also a good idea to wash away any excess paint once you are done, so you don’t wind up with smudges or smears on your dog.

Then it is time to glue the mask on your dog’s head. First you will need to be certain that you get a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it’s secure, then you can begin to glue the mask onto the dog’s face. Take the piece of cardboard that’s used for the foundation of the mask and fold it over. Make certain it’s quite powerful and then use your hands to ensure the cardboard down in place.

Keep your hands out of the way and use tape to hold strong dog kennel it in place as you repeat the procedure on the cardboard folds till you’ve got the mask snugged firmly onto the surface of your dog. Do not make the folds too large or else it might look messy. Once you’ve done this, you can then take out the mask and attach the cardboard ears. And attach the other area of the mask on the dog. Be sure the ears are flat and make sure that it is not too short or long as this will cause some problems with the mask slipping off the dog’s face.

If you’re using a dog mask as your dog protection, you’ll have to do some sanding to be sure that it’s safe on your dog. You can do this by sanding off any excess paper that may have been removed from your mask.

Scroll to top

Free WordPress Themes, Free Android Games